Anti-Static Twill Grid Taffeta Fabric (ESD Ткань) – F820

In professional manufacturing and lab environments, static electricity is not only a comfort issue—it can become a риск качества (damage to static-sensitive items), а технологический риск (particle attraction and contamination concerns), and in some facilities a safety concern depending on the materials and atmosphere involved. That’s why premium B2B buyers don’t purchase “anti-static fabric” as a generic lining—they purchase it as part of a documented Программа контроля ЭСР that includes materials, одежда, заземление, обучение, и проверка.

F820 Anti-Static Twill Grid Taffeta is designed to fit that program-style sourcing approach: it gives procurement teams a clear spec sheet (композиция, проводящий рисунок, диапазон сопротивления, масса, ширина, MOQ), while providing garment factories with a stable woven structure that cuts and sews efficiently at scale.

Ключевые характеристики

These are the core RFQ fields directly shown on the referenced product page:

What Makes F820 an “ESD / Антистатическая ткань?

1) Carbon conductive yarn creates a controlled discharge pathway

F820 uses 2% углерод in the construction to provide conductive pathways that help reduce static build-up and allow charges to dissipate more predictably than ordinary synthetic fabrics.

2) 0.5cm conductive grid improves uniformity and QC visibility

The 0.5сетка см is a strong B2B feature because it’s:

• Easy to document in tech packs and procurement specs

• Easy to QC visually (grid consistency across lots)

• Easy to standardize for repeat orders and multiple factories

3) Resistance range aligned with common “dissipative” expectations

Списки продуктов 10⁶–10⁸ Ом.
Many ESD references describe “dissipative” materials in the general window around 10⁶ to 10⁹ ohms (definitions and test methods vary by application).
That makes F820 a practical choice for uniform/workwear programs that need controlled static dissipation—especially when matched to the buyer’s required test method and verification plan.

Примечание для покупателя: resistance can vary with humidity, дизайн одежды, laundering cycles, and test setup—so premium programs typically verify finished garments, не только образцы тканей. IEC garment test methods explicitly cover measuring electrical resistance across garment components, швы, and cuffs.

Why Premium B2B Buyers Choose F820

Lightweight but durable: 110 gsm for daily wear + production efficiency

В 110 GSM, F820 is light enough for comfortable shift wear and layered garment systems, yet structured enough (with twill + higher density) to perform in daily uniforms and protective workwear.

Twill structure for better drape and workwear feel

The 2/3 саржа weave typically provides a balanced feel that works well for uniforms: хорошая драпировка, stable handling during sewing, and a professional “workwear” appearance. (Your final handfeel can also depend on finishing and garment construction.)

Clear spec sheet for fast procurement decisions

Your buyer’s procurement team needs a quick “yes/no” based on: композиция, grid spacing, диапазон сопротивления, масса, ширина, MOQ. This product page provides those decision fields directly—reducing RFQ back-and-forth and improving conversion.

Industry-targeted positioning (lab, мощность, oil/chemical)

The product is explicitly positioned for workwear in laboratory, мощность, и нефтяная/химическая промышленность—which aligns with the exact buyer segments that tend to request ESD/anti-static features during sourcing.

Типичные применения

1) Industrial workwear programs

• ESD jackets, pants, комбинезоны

• Production floor uniforms in static-managed zones

• Maintenance uniforms where static control is part of the purchasing checklist

2) Laboratory & controlled environments

• Lab coats and inspection coats

• ESD smocks for controlled work areas

• Lightweight outer layers or internal panels depending on garment design

3) Oil / chemical industry workwear systems

Where anti-static workwear is specified to reduce electrostatic risk, fabrics are usually evaluated not only by resistance targets but also by garment design and how the garment integrates into the facility’s earthed system and procedures. (If your end market requires EN 1149 PPE certification, please specify it early—see below.)

Стандарты & Testing Guidance

ESD performance is a “system,” not a single fabric claim

МЭК 61340-5-1 describes requirements for an Программа контроля ЭСР (planning, implementation, and maintenance).
Industry guidance also emphasizes that ESD programs typically include training and compliance verification/auditing, not only materials.
Для B2B-брендов, this is important messaging: it keeps your product page credible and reduces disputes caused by over-claiming.

Finished-garment resistance testing matters

МЭК 61340-4-9 provides standard test methods for резистивная характеристика одежды, including point-to-point and sleeve-to-sleeve methods and consideration of seams/cuffs.
If your customers require audit-level results, plan a sampling step where the finished coat/smock/coverall is tested under the required method.

If your end use is explosive-risk (ATEX-type), подтвердить RU 1149 маршрут

В 1149 is a commonly referenced series for electrostatic properties of protective clothing; В 1149-5 specifies performance requirements for protective clothing that dissipates electrostatic charges as part of a total earthed system (commonly relevant in explosive-risk environments).
If your program needs EN 1149 сертификация, share the exact part(с) required and any additional PPE standards needed for your market.

OEM / Параметры настройки

For high-quality B2B brand customers, customization and program control are often what closes the order:

• Настройка цвета (однородные цвета; затеняющая лента для повторных заказов)

• Grid layout confirmation (appearance consistency across garment panels)

• Длина рулона, упаковка, and labeling aligned to cutting-room workflow

• Lot tracking & QC plan for long-term supply stability

• Testing alignment: fabric swatch checks + garment prototype testing per your customer’s method

Информация для заказа

• MOQ: 1000 метры

• Оплата: TT, Аккредитив, Вестерн Юнион

For premium programs, лучшая практика это:

1. approve shade + на ощупь с лабораторными соусами / образцы

2. build a prototype garment and verify the required resistance method

3. lock bulk supply with lot controls (repeatability is the real “premium” value)

Призыв к действию (запрос цен / Образец / Технический лист)

Если вы занимаетесь поиском Anti-Static Twill Grid Taffeta (F820) for workwear or laboratory garments, send your use case and test requirements. Мы ответим подробное предложение, варианты выборки, and a practical testing plan that matches your customer audits.

Контрольный список быстрого запроса цен (рекомендуется):

• тип одежды (лабораторный халат / халат / комбинезон / куртка)

• требование к целевому сопротивлению + test method (ткань против одежды)

• цвет + годовой прогноз

• пункт доставки + предпочтения по упаковке

• any required standards (МЭК 61340 / В 1149, и т. д.)

Часто задаваемые вопросы

1 квартал: What is the standard composition of F820?
98% полиэстер / 2% углерод conductive yarn.

2 квартал: Что означает «проводящее пространство 0,5 см»??
Это относится к расстоянию проводящих сетка—listed as 0.5 см on the product page.

Q3: Какой диапазон сопротивления указан для этой антистатической ткани??
На странице продукта перечислены 10⁶–10⁸ (Ом, как показано).

Q4: Достаточно ли одной ткани, чтобы гарантировать соответствие требованиям ESD??
Обычно нет. ESD control is typically managed through an Программа контроля ЭСР that includes procedures, обучение, and compliance verification.

Q5: Do buyers need garment-level testing?
Often yes—especially for audits. IEC garment test methods cover measuring resistance across garment components including seams and cuffs.

Q6: Каковы стандартные вес и ширина??
110 GSM и 148 см ширина.

Q7: Что такое переплетение/стиль??
Это 2/3 саржа.

Q8: What is the MOQ and payment term?
минимальный заказ 1000 метры; payment options listed include TT, Аккредитив, Вестерн Юнион.

Q9: Which industries is it designed for?
The page notes use in спецодежда для лаборатория, мощность, и нефтяная/химическая промышленность.

Вопрос 10: If we need EN 1149 compliance, can this fabric be used?
Potentially—but EN 1149 compliance depends on the finished garment, the design, and how it’s used as part of a total earthed system. Confirm the exact EN 1149 parts and your customer’s test route before finalizing sourcing.