Anti-Static Stripe Matte Twill Fabric, ESD Ткань (F500)

Premium B2B buyers don’t purchase ESD fabric like a basic uniform cloth. They purchase it to reduce risk—risk of product damage in electronics-adjacent workflows, risk of nuisance static that lowers productivity, и (in certain environments) risk of electrostatic discharge becoming an ignition source.

That’s why good ESD workwear programs are built around three pillars:

1. A fabric with a conductive pathway (carbon yarn grid/stripe)

2. A garment design that supports consistent performance (proper patterning, закрытия, манжеты, and wearing practices)

3. A site ESD control program (заземление, процедуры, и проверка)

This product (F500) focuses on pillar #1—providing a clear, spec-driven ESD stripe fabric that garment factories and brands can mass-produce reliably, while keeping the handfeel and wear comfort suitable for long shifts thanks to the polyester/cotton blend and twill construction.

Core Specifications

• Название предмета: Антистатическая полоса матовой ткань, ESD Ткань

• Пункт №.: F500

• материал: 92% полиэстер / 7% хлопок / 1% углерод

• Количество пряжи: 150D * 32S

• вес: 150 GSM

• плотность: 130*70

• Ширина: 148 см

• Стиль / ткать: Twill

• Проводящий пространство: 1.2 см

• сопротивление: 10⁶–10⁸ Ом

• MOQ: 1000 метры

• Typical industries mentioned: лаборатория, мощность, oil/chemical workwear

Why This Fabric Converts with High-Quality B2B Buyers

1) Stripe conductive design (1.2Расстояние в см) for repeatable ESD performance

The 1.2проводящее расстояние см is a strong “procurement-friendly” feature because it’s easy to document in spec sheets, compare across suppliers, and control in production.
Brands typically choose stripe/grid patterns based on garment style, комфорт, cost, and required verification method.

2) Позиционирование сопротивления «Диссипативный диапазон» (10⁶–10⁸ Ом)

Список страниц 10⁶–10⁸ Ом resistance.
Many ESD references describe ~10⁶ to 10⁹ ohms as a common “dissipative” window (контролируемый разряд, а не внезапная искра).
That makes this fabric a practical fit for ESD workwear programs where buyers want controlled charge dissipation.

3) Polyester/cotton blend for comfort + durability in daily uniforms

100% synthetic ESD fabrics can feel hot or clammy in some workplaces. This fabric’s 7% хлопок improves comfort and wearability while the polyester backbone provides strength, стабильность размеров, and easier care.
For uniform programs, comfort isn’t a “nice-to-have”—it directly impacts compliance (whether workers actually wear the garments correctly).

4) Matte twill appearance for professional uniforms

A matte twill surface is often preferred for industrial uniforms because it looks cleaner, reduces shine, and maintains a “workwear” aesthetic. The twill structure also typically offers good drape and abrasion tolerance for daily use.

5) Spec clarity for OEM/ODM workflow

B2B brands and garment factories need a clean data set: композиция, масса, ширина, проводящее расстояние, resistance, MOQ. This page includes exactly those fields, which reduces RFQ back-and-forth and speeds sampling decisions.

Рекомендуемые приложения

ESD workwear for industrial operations

• ESD jackets, pants, комбинезоны

• Workshop uniforms for precision processes

• Maintenance uniforms where static is a known issue

Lab & clean operating environments

• Lab coats, inspection coats

• Technical uniforms for controlled manufacturing

Власть, масло & chemical industry workwear

The product page explicitly highlights laboratory, мощность, and oil/chemical workwear use.
(If your environment includes explosive atmospheres/ATEX-type risks, your compliance team should specify the exact garment standard and system requirements.)

Стандарты & Примечания о соответствии

ESD control is a system—not just fabric

МЭК 61340-5-1 is widely referenced for Программа контроля ЭСР требования (how organizations design, implement, and maintain an ESD control program).
Even the best fabric performs best when used with proper grounding, процедуры, и проверка.

В 1149 family is commonly referenced for electrostatic protective clothing

В 1149 standards are commonly used in Europe for protective clothing electrostatic properties, intended to prevent incendiary discharges in certain conditions.
Важный: final compliance depends on the finished garment, тот design, и total earthed system used in the workplace—not only the fabric.

Buyer Checklist: What to Send in Your RFQ

To attract high-quality B2B buyers (and close them faster), invite them to provide:

1. End use garment type (лабораторный халат / комбинезон / куртка / pants)

2. Target market (EU/UK/US/others) + required standards (если таковые имеются)

3. Цвет & stripe direction preference (warp stripe vs weft stripe, if specified)

4. Order quantity & пункт доставки

5. Required test method (surface resistance vs point-to-point garment testing)

This positions your offer like a professional supplier—exactly what premium buyers want.

Призыв к действию (запрос цен / Образец / Технический лист)

Если вы занимаетесь поиском ESD stripe matte twill fabric for uniforms or protective workwear programs, send your application, цвет, количество заказа, and required resistance/testing method. Мы ответим подробное предложение, Время выполнения, и варианты выборки.

Свяжитесь с нами для получения подробного предложения:
Компания: Lean Textile Co., ООО.
Веб-сайт: https://www.technical-fabrics.com/
Эл. адрес: [email protected]
WhatsApp / Вичат: 008615051486055

Часто задаваемые вопросы

1 квартал: Каков стандартный состав этой антистатической ткани??
Это 92% полиэстер / 7% хлопок / 1% углерод, using carbon conductive yarn for static dissipation.

2 квартал: What does “1.2cm conductive space” mean?
It refers to the spacing of the conductive stripe pattern in the fabric. Этот продукт перечисляет 1.2см conductive space.

Q3: Каков диапазон сопротивления?
На странице продукта перечислены 10⁶–10⁸ Ом.
Many ESD references describe ~10⁶–10⁹ ohms as a typical dissipative range, but your required range depends on your site program and verification method.

Q4: Is the fabric alone enough to guarantee ESD safety?
Нет. ESD protection is typically managed through an Программа контроля ЭСР (заземление, процедуры, проверка) in addition to ESD garments.

Q5: Каковы стандартные вес и ширина??
150 GSM weight and 148 см ширина.

Q6: What weave is it and why does it matter?
This fabric is саржа, which is commonly used for workwear due to good drape and durability in daily use.

Q7: What is MOQ and payment?
минимальный заказ 1000 метры. Варианты оплаты указаны: TT, Аккредитив, Вестерн Юнион.

Q8: Which industries is it designed for?
The page mentions use in лаборатория, power industry, and oil/chemical industry workwear.