Anti-Static Stripe Matte Twill Fabric, ESD Tessuto (F500)

Premium B2B buyers don’t purchase ESD fabric like a basic uniform cloth. They purchase it to reduce risk—risk of product damage in electronics-adjacent workflows, risk of nuisance static that lowers productivity, E (in certain environments) risk of electrostatic discharge becoming an ignition source.

That’s why good ESD workwear programs are built around three pillars:

1. A fabric with a conductive pathway (carbon yarn grid/stripe)

2. A garment design that supports consistent performance (proper patterning, chiusure, polsini, and wearing practices)

3. A site ESD control program (messa a terra, procedures, and verification)

This product (F500) focuses on pillar #1—providing a clear, spec-driven ESD stripe fabric that garment factories and brands can mass-produce reliably, while keeping the handfeel and wear comfort suitable for long shifts thanks to the polyester/cotton blend and twill construction.

Core Specifications

• Nome dell'elemento: tessuto striscia opaca antistatico, ESD Tessuto

• Articolo n.: F500

• Materiale: 92% poliestere / 7% cotone / 1% carbonio

• titolo del filato: 150D * 32S

• Peso: 150 GSM

• Densità: 130*70

• Larghezza: 148 centimetro

• Stile / tessere: spigato

• spazio conduttivo: 1.2 centimetro

• Resistenza: 10⁶–10⁸ Ω

• MOQ: 1000 metri

• Typical industries mentioned: laboratorio, energia, oil/chemical workwear

Why This Fabric Converts with High-Quality B2B Buyers

1) Stripe conductive design (1.2spaziatura cm) for repeatable ESD performance

IL 1.2spaziatura conduttiva cm is a strong “procurement-friendly” feature because it’s easy to document in spec sheets, compare across suppliers, and control in production.
Brands typically choose stripe/grid patterns based on garment style, comfort, costo, and required verification method.

2) “Dissipative-range” resistance positioning (10⁶–10⁸ Ω)

La pagina elenca 10⁶–10⁸ Ω resistance.
Many ESD references describe ~10⁶ to 10⁹ ohms as a common “dissipative” window (scarica controllata piuttosto che scintilla improvvisa).
That makes this fabric a practical fit for ESD workwear programs where buyers want controlled charge dissipation.

3) Polyester/cotton blend for comfort + durability in daily uniforms

100% synthetic ESD fabrics can feel hot or clammy in some workplaces. This fabric’s 7% cotone improves comfort and wearability while the polyester backbone provides strength, stabilità dimensionale, and easier care.
For uniform programs, comfort isn’t a “nice-to-have”—it directly impacts compliance (whether workers actually wear the garments correctly).

4) Matte twill appearance for professional uniforms

A matte twill surface is often preferred for industrial uniforms because it looks cleaner, reduces shine, and maintains a “workwear” aesthetic. The twill structure also typically offers good drape and abrasion tolerance for daily use.

5) Spec clarity for OEM/ODM workflow

B2B brands and garment factories need a clean data set: composizione, peso, larghezza, spaziatura conduttiva, resistance, MOQ. This page includes exactly those fields, which reduces RFQ back-and-forth and speeds sampling decisions.

Applicazioni consigliate

ESD workwear for industrial operations

• ESD jackets, pants, tute

• Workshop uniforms for precision processes

• Maintenance uniforms where static is a known issue

Lab & clean operating environments

• Lab coats, inspection coats

• Technical uniforms for controlled manufacturing

Power, oil & chemical industry workwear

The product page explicitly highlights laboratory, energia, and oil/chemical workwear use.
(If your environment includes explosive atmospheres/ATEX-type risks, your compliance team should specify the exact garment standard and system requirements.)

Standard & Note di conformità

ESD control is a system—not just fabric

CEI 61340-5-1 is widely referenced for Programma di controllo ESD requisiti (how organizations design, implement, and maintain an ESD control program).
Even the best fabric performs best when used with proper grounding, procedures, and verification.

IN 1149 family is commonly referenced for electrostatic protective clothing

IN 1149 standards are commonly used in Europe for protective clothing electrostatic properties, intended to prevent incendiary discharges in certain conditions.
Importante: final compliance depends on the finished garment, IL design, e il total earthed system used in the workplace—not only the fabric.

Buyer Checklist: What to Send in Your RFQ

To attract high-quality B2B buyers (and close them faster), invite them to provide:

1. End use garment type (lab coat / tuta / giacca / pants)

2. Target market (EU/UK/US/others) + required standards (se presente)

3. Colore & stripe direction preference (warp stripe vs weft stripe, if specified)

4. Order quantity & destinazione di consegna

5. Required test method (surface resistance vs point-to-point garment testing)

This positions your offer like a professional supplier—exactly what premium buyers want.

Invito all'azione (Richiesta di offerta / Campione / Scheda Tecnica)

Se stai effettuando acquisti ESD stripe matte twill fabric for uniforms or protective workwear programs, send your application, colore, quantità dell'ordine, and required resistance/testing method. We’ll respond with a offerta dettagliata, tempi di consegna, e opzioni di campionamento.

Contattaci per un'offerta dettagliata:
Azienda: Magra Textile Co., Ltd.
Sito web: https://www.tessuti-tecnici.com/
E-mail: [email protected]
WhatsApp / WeChat: 008615051486055

Domande frequenti

Q1: Qual è la composizione standard di questo tessuto ESD?
È 92% poliestere / 7% cotone / 1% carbonio, using carbon conductive yarn for static dissipation.

Q2: What does “1.2cm conductive space” mean?
It refers to the spacing of the conductive stripe pattern in the fabric. Questo prodotto elenca 1.2centimetro conductive space.

Q3: Qual è l'intervallo di resistenza?
La pagina del prodotto elenca 10⁶–10⁸ Ω.
Many ESD references describe ~10⁶–10⁹ ohms as a typical dissipative range, but your required range depends on your site program and verification method.

Q4: Is the fabric alone enough to guarantee ESD safety?
NO. ESD protection is typically managed through an Programma di controllo ESD (messa a terra, procedures, verification) in addition to ESD garments.

Q5: Quali sono il peso e la larghezza standard??
150 GSM weight and 148 centimetro larghezza.

Q6: What weave is it and why does it matter?
This fabric is saia, which is commonly used for workwear due to good drape and durability in daily use.

D7: What is MOQ and payment?
MOQ è 1000 metri. Opzioni di pagamento elencate: TT, L/C, Western Union.

Q8: Which industries is it designed for?
The page mentions use in laboratorio, power industry, and oil/chemical industry workwear.