Anti-Static Stripe Matte Twill Fabric, EDS Tela (F500)

Premium B2B buyers don’t purchase ESD fabric like a basic uniform cloth. They purchase it to reduce risk—risk of product damage in electronics-adjacent workflows, risk of nuisance static that lowers productivity, y (in certain environments) risk of electrostatic discharge becoming an ignition source.

That’s why good ESD workwear programs are built around three pillars:

1. A fabric with a conductive pathway (carbon yarn grid/stripe)

2. A garment design that supports consistent performance (proper patterning, cierres, puños, and wearing practices)

3. A site ESD control program (toma de tierra, procedures, and verification)

This product (F500) focuses on pillar #1—providing a clear, spec-driven ESD stripe fabric that garment factories and brands can mass-produce reliably, while keeping the handfeel and wear comfort suitable for long shifts thanks to the polyester/cotton blend and twill construction.

Core Specifications

• Nombre del árticulo: tela mate raya antiestático, EDS Tela

• Número de artículo.: F500

• Material: 92% poliéster / 7% algodón / 1% carbón

• Recuento de hilos: 150D * 32S

• Peso: 150 GSM

• Densidad: 130*70

• Anchura: 148 cm

• Estilo / tejer: Tela asargada

• espacio conductora: 1.2 cm

• Resistencia: 10⁶–10⁸ Ω

• MOQ: 1000 metros

• Typical industries mentioned: laboratorio, poder, oil/chemical workwear

Why This Fabric Converts with High-Quality B2B Buyers

1) Stripe conductive design (1.2espaciado en cm) for repeatable ESD performance

El 1.2cm de separación conductora is a strong “procurement-friendly” feature because it’s easy to document in spec sheets, compare across suppliers, and control in production.
Brands typically choose stripe/grid patterns based on garment style, comodidad, cost, and required verification method.

2) “Dissipative-range” resistance positioning (10⁶–10⁸ Ω)

La página enumera 10⁶–10⁸ Ω resistance.
Many ESD references describe ~10⁶ to 10⁹ ohms as a common “dissipative” window (Descarga controlada en lugar de chispa repentina.).
That makes this fabric a practical fit for ESD workwear programs where buyers want controlled charge dissipation.

3) Polyester/cotton blend for comfort + durability in daily uniforms

100% synthetic ESD fabrics can feel hot or clammy in some workplaces. This fabric’s 7% algodón improves comfort and wearability while the polyester backbone provides strength, estabilidad dimensional, and easier care.
For uniform programs, comfort isn’t a “nice-to-have”—it directly impacts compliance (whether workers actually wear the garments correctly).

4) Matte twill appearance for professional uniforms

A matte twill surface is often preferred for industrial uniforms because it looks cleaner, reduces shine, and maintains a “workwear” aesthetic. The twill structure also typically offers good drape and abrasion tolerance for daily use.

5) Spec clarity for OEM/ODM workflow

B2B brands and garment factories need a clean data set: composición, peso, ancho, espaciado conductivo, resistance, MOQ. This page includes exactly those fields, which reduces RFQ back-and-forth and speeds sampling decisions.

Aplicaciones recomendadas

ESD workwear for industrial operations

• ESD jackets, pants, monos

• Workshop uniforms for precision processes

• Maintenance uniforms where static is a known issue

Lab & clean operating environments

• Lab coats, abrigos de inspección

• Technical uniforms for controlled manufacturing

Power, oil & chemical industry workwear

The product page explicitly highlights laboratory, poder, and oil/chemical workwear use.
(If your environment includes explosive atmospheres/ATEX-type risks, your compliance team should specify the exact garment standard and system requirements.)

Estándares & Notas de cumplimiento

ESD control is a system—not just fabric

CEI 61340-5-1 is widely referenced for programa de control de ESD requisitos (how organizations design, implement, and maintain an ESD control program).
Even the best fabric performs best when used with proper grounding, procedures, and verification.

EN 1149 family is commonly referenced for electrostatic protective clothing

EN 1149 standards are commonly used in Europe for protective clothing electrostatic properties, intended to prevent incendiary discharges in certain conditions.
Importante: final compliance depends on the finished garment, el design, y el total earthed system used in the workplace—not only the fabric.

Buyer Checklist: What to Send in Your RFQ

To attract high-quality B2B buyers (and close them faster), invite them to provide:

1. End use garment type (bata de laboratorio / mono / chaqueta / pants)

2. Target market (EU/UK/US/others) + required standards (si alguno)

3. Color & stripe direction preference (warp stripe vs weft stripe, if specified)

4. Order quantity & destino de entrega

5. Required test method (surface resistance vs point-to-point garment testing)

This positions your offer like a professional supplier—exactly what premium buyers want.

Llamado a la acción (Solicitud de cotización / Muestra / Ficha Técnica)

Si estás abasteciendo ESD stripe matte twill fabric for uniforms or protective workwear programs, envía tu solicitud, color, cantidad de pedido, and required resistance/testing method. Responderemos con un oferta detallada, plazo de entrega, y opciones de muestreo.

Contáctenos para una oferta detallada:
Compañía: Magra textiles Co, Limitado.
Sitio web: https://www.tejidos-tecnicos.com/
Email: [email protected]
WhatsApp / WeChat: 008615051486055

Preguntas frecuentes

Q1: ¿Cuál es la composición estándar de este tejido ESD??
Es 92% poliéster / 7% algodón / 1% carbón, using carbon conductive yarn for static dissipation.

Q2: What does “1.2cm conductive space” mean?
It refers to the spacing of the conductive stripe pattern in the fabric. Este producto enumera 1.2cm conductive space.

Q3: ¿Cuál es el rango de resistencia??
La página del producto enumera 10⁶–10⁸ Ω.
Many ESD references describe ~10⁶–10⁹ ohms as a typical dissipative range, but your required range depends on your site program and verification method.

Q4: Is the fabric alone enough to guarantee ESD safety?
No. ESD protection is typically managed through an programa de control de ESD (toma de tierra, procedures, verification) in addition to ESD garments.

Q5: ¿Cuáles son el peso y el ancho estándar??
150 GSM weight and 148 cm ancho.

Q6: What weave is it and why does it matter?
This fabric is tela asargada, which is commonly used for workwear due to good drape and durability in daily use.

P7: What is MOQ and payment?
La cantidad mínima de pedido es 1000 metros. Opciones de pago enumeradas: TT, L / C, Western Union.

P8: Which industries is it designed for?
The page mentions use in laboratorio, power industry, and oil/chemical industry workwear.